CL, CLG, CBLQ Marine pump
Overview: CL, CLG type pumps are single suction volute blade pumps, CBLQ type is series and parallel volute blade pump, suitable for ship cooling system, bilge ballast system, circulating water system, fire fighting system, auxiliary boiler feed water system, daily water system, etc. Used for ship transportation of seawater or fresh water at normal temperature. The inlet pressure of CL and CBLQ pump is allowed to be 0.6mpa (6kGF /cm2), and that of CLG pump is allowed to be 3MPa (30kGF /cm2). Parameters: flow Q 100 ~ 972 m3 / h head h 10 ~ 85 m model description: 8 CLG Ⅲ - 25 8 - pump suction diameter is 25 except (that is, the suction diameter is 200 mm) CLG - vertical Marine pump Ⅲ 25 -- - the third improvement than the revolution be divided exactly by 10 a few structure: through the pump and motor bearing couplet body, CL, CLG wall installation, foot pump and motor (or motor transition base) installed in the same vertical plane. The suction of the pump is vertical downward, and the discharge is horizontal. Type CBLQ, supported by a vertical mount, pump shaft seal with packing or mechanical seal. 8 CLG Ⅲ - 25 and 8 CLG Ⅲ - the difference between a spit out direction only 25 by 90 degrees, CLBQ type by reversing valve, can be used in series, in parallel. Direction of rotation: from the motor end watching CL 5, 8, 10 CLG - 40300 CLG, 40, other CL CBLQ type pump is clockwise, 8 CLG Ⅲ - 25, 8 CLG Ⅲ - 25 a, 10 CLG CLG - 40300 - type 40 left for counterclockwise. Main parts of the pump material: silicon brass. Complete range: complete supply pump, motor, coupling, mechanical seal, etc. When ordering, please indicate the material of main parts, if you have special requirements for pumps and motors, you can negotiate with our company about the technical requirements.