S-type single-stage double-suction horizontal open centrifugal pump [technology imported from Ingersoll Rand] Overview: "S" series pump is single stage, double suction horizontal open centrifugal clean water pump. "S" series pump is a high efficiency energy-saving product with simple structure and excellent performance. Suitable for city, power station, water conservancy project and other water supply pump, can also be used for irrigation and drainage in farmland. For conveying clean water without solid particles or other liquids with physical and chemical properties similar to water, the temperature of which is 0℃ ~ 80℃. The maximum allowable inlet pressure is 0.6mpa. Parameters: flow Q 88 ~ 1400 m3 / h head h 12 ~ 100 m model description: 6 x 14 sd - out diameter (14 inches) - the largest impeller outer diameter of the round (inches) S - level of single-stage double-suction open centrifugal pump D - the largest impeller diameter class code (A, B, C, D, E, F, A total of six) structure: "S" electro pump for horizontal installation, suction and discharge nozzles are below the pump shaft centerline, level of pump body, does not need to remove the inlet and outlet pipe maintenance. The shaft seal is soft packing seal; Can also be changed to mechanical seal. Direction of rotation: From the motor end, the "S" series pump rotates counterclockwise, with the suction inlet on the left, the discharge outlet on the right, and the pump rotating clockwise, with the suction inlet on the right and the discharge outlet on the left. Main parts material: the pump flow parts material are cast iron. Complete range: complete supply pump, motor, bottom plate, coupling, import and export short pipe, etc. When ordering, please indicate the material of main parts, if you have special requirements for pumps and motors, you can negotiate with our company about the technical requirements.