IFV type eddy current pump Overview: THE IFV type eddy current pump is our latest product based on advanced technology from Ebara Corporation, Japan. The pump because of the use of complete vortex shape, impeller and pump shell clearance and discharge diameter is the same, therefore, this pump for sewage, sludge and fiber has an excellent non-blocking performance. The pump has high efficiency, low vibration, stable operation, impeller inlet has the effect of stirring foreign matter, so it has good cavitation performance. For the transport of sewage, sludge, sewage, liquid containing the largest particles shall not be larger than the spit diameter. The medium temperature is 0℃ ~ 80℃, the allowable inlet pressure is 0.29MPa (3kGF /cm2), and the maximum service pressure is 0.629MPa (7kGF /cm2). The performance parameters listed in this catalog are obtained by test under the condition of clear water (specific gravity 1) at room temperature. Parameters: flow Q 36-480 m3 / h head h 10 ~ 49 m model specification: 125 x 100 IFV - 125 - L suction diameter (100 mm) - discharge diameter mm (same as the suction diameter not said) IFV - eddy current is not stuck pump L - head code structure: pump is horizontal installation, horizontal axial inhalation, vertical spit, pump body foot support, the rotor can be pulled from behind the pump body, does not need to remove the pipe and pump maintenance. The shaft seal adopts packing seal. Direction of rotation: The pump rotates clockwise when viewed from the motor end. Main parts material: generally gray cast iron, but also according to the user needs to choose other materials. Complete range: complete supply pump, motor and base. When ordering, please indicate the material of impeller and sealing ring. If you have special requirements for pumps and motors, you can negotiate with the company about technical requirements.