ISL type single - stage single - suction vertical centrifugal pump Overview: ISL type single stage single suction vertical centrifugal clean water pump, suitable for industrial and urban water supply and drainage, high-rise building central air-conditioning, fire systems, can also be used for agricultural irrigation and drainage. Used for conveying clean water or other liquids similar to water in physical and chemical properties. The temperature of the liquid to be transported is not higher than 80℃. The maximum allowable inlet pressure is 0.6mpa. Parameters: flow Q 25 ~ 400 m3 / h ~ 125 m lift h 4 types: ISL125 ISL - 100 - J - 200 - A - Z - single-stage single-suction centrifugal pump, vertical install suction diameter (mm) of the 125-100 - vomit outlet diameter (mm) J - said slow down using 200 - in the name of the impeller diameter (mm) A, A, B, C, respectively after the first, second and third time cutting impeller diameter Z - said pump inlet straight down (with no Z pump inlet horizontal layout) structure: Pump vertical installation horizontal or axial suction, horizontal discharge, pump suction inlet can be 0O, 90o, 180o, 270O four directions arbitrary installation, greatly reduce the floor area, suitable for smaller space use. The pump is directly connected with the motor, the impeller is installed on the motor shaft, the shaft seal of the pump is mechanically sealed, the pump is externally washed by water, and the rotation direction is: from the motor end, the pump is rotating in the clockwise direction. The main parts are made of ordinary gray cast iron. Complete range: complete supply pump, motor, check valve and gate valve. When ordering, please indicate the material of main parts, if you have special requirements for pumps and motors, you can negotiate with our company about the technical requirements.