IH type single suction single stage chemical centrifugal pump
Overview: IH type chemical centrifugal pump is suitable for chemical plants, used to transport corrosive liquid without solid particles, the viscosity is similar to water, the medium temperature is generally 20℃ ~ 105℃. The maximum working pressure of the pump is 1.6mpa. Inlet pressure shall not be higher than 0.6mpa. Specification: IH50 -- 32 -- 125A IH -- Single-stage single-suction chemical centrifugal pump 50 -- suction diameter of 50mm 32 -- pump outlet diameter of 32mm 125 -- nominal diameter of impeller of 125mm A -- Change of outside diameter of impeller. Structure type: IH type pump is a single-stage single-suspension centrifugal pump, its structure is the rear door, that is, the pump body does not move, the impeller can be taken out from the back of the pump body, without removing the pump inlet and outlet pipeline. The shaft seal of IH type pump can be loaded with packing seal or mechanical seal according to user's requirement. The bearing is rolling bearing lubricated with thin oil. Direction of rotation: The pump rotates clockwise when viewed from the motor end. Main parts material: the parts contacting with the medium are made of alloy stainless steel, the main brands are ZG1Cr18Ni9, ZGCr18Ni12Mo2Ti, etc. Complete range: complete supply pump, motor, common base, coupling, etc., also provide check valve, gate valve. When ordering, please indicate the material of main parts, if you have special requirements for pumps and motors, you can negotiate with our company about the technical requirements.